Introduction Welcome to Part 2 of this article series. In Part 1, we started off by discussing the goal of this lab. That goal is to wrap all the information out there on how to utilize Central Site Resilience in regards to failovers, fallbacks, how redirects function, how SRV records fit in, etc... We first discussed what the lab setup is going to be using Hyper-V, and then … [Read more...] about Lync 2010 Central Site Resilience w/ Backup Registrars, Failovers, and Failbacks – Part 2
Lync 2010 Central Site Resilience w/ Backup Registrars, Failovers, and Failbacks – Part 1
Introduction I've seen quite a bit of discussion on Lync 2010 Backup Registars. There's been some PowerPoints which show how a Backup Registrar works, there's been some blogs that discuss how clients are handed back a primary registrar and backup registrar, etc... What I have not seen, is one article that wraps everything together and shows it all in action. That is what … [Read more...] about Lync 2010 Central Site Resilience w/ Backup Registrars, Failovers, and Failbacks – Part 1
Lync 2010 Edge Servers and IP Requirements – NAT vs Public IP
To this date, I still see a lot of confusion as to the IP requirements of Lync 2010 Edge Servers. I have seen the following questions:Why do we require Public IP addresses on all 3 Lync Edge Roles when using Hardware Load Balancing? Why does the Audio/Video Edge Role need a Public IP when behind a Hardware Load Balancer? Why can we NAT when we're doing DNS Load … [Read more...] about Lync 2010 Edge Servers and IP Requirements – NAT vs Public IP
Using Lync 2010 Mobility on your Corporate WIFI Networks
Lync 2010 Mobility has been out for a few months now. Jeff Schertz has a great writeup on Lync Mobility on his blog here. What I wanted to go into is some more detail on deploying Lync Mobility on your corporate wifi networks which I haven't seen documented in very good detail on Technet or other blog articles. Now keep in mind, this blog article is for deploying Lync … [Read more...] about Using Lync 2010 Mobility on your Corporate WIFI Networks
Enabling QoS for Lync Server 2010 – Part 2
Welcome to Part 2 on how to Enable QoS for Lync Server 2010. The purpose of this multi-part article (first part for QoS on Lync Client and second part for QoS on Lync Server) is to lay everything out in a concise manner to help you, the reader, understand how to enable QoS. Keep in mind that this article is only for the ability to enable QOS, it is not a comprehensive guide on … [Read more...] about Enabling QoS for Lync Server 2010 – Part 2
